The all new Linea HS™ delivers line rates up to an incredible 400 kHz at 32k resolution--over 5 Gpixels/sec via CLHS interface.
Building on Teledyne DALSA’s heritage in CCD TDI, the new CMOS TDI technology in our Linea HS is the most advanced in the marketplace. With up to 128 TDI stages (plus an extra 64 in HDR mode) for unmatched sensitivity and incredibly low noise, Linea HS excels in the highest speed, lowest light applications.
The Linea HS brings your imaging system the speed and power of the PCIe Gen 3 platform when paired with Xtium2.
Leveraging the high efficiency of the CameraLink HS interface's X-protocol, the Xtium2 CLHS PX8 supports Active Optical Cable (AOC) and industry standard CX4 cables with up to 7-CLHS lanes, each operating at 10.3 Gbits/s, to acquire images at up to 8.4 GBytes/s.
The Xtium™2 CLHS FX8 builds in native fiber optic connectors, supporting up to four bidirectional SFP+ modules to deliver aggregate bandwidth of 4.8 GBytes/s, all in a compact, half-length, single slot solution.
With slim, robust, and cost effective fiber optic cabling, Linea HS and Xtium2 allow cable lengths beyond 100 meters to enable the newest and most demanding vision applications.
The Linea HS cameras deliver the highest performance available, with unique features that significantly improve detectability for many demanding applications.
The Linea HS enables high speed and high sensitivity imaging in light starved conditions like these:
If you need maximum throughput in the toughest conditions, you need Linea HS.
Multifield is a new imaging technology that enables capturing multiple images using various lighting conditions (e.g. brightfield, darkfield, and backlight) in a single scan.
Teledyne DALSA’s Linea HS Multifield camera is the first product in the industry capable of capturing up to three images using light sources at different wavelengths. The camera uses advanced wafer-level coated dichroic filters with minimum spectral crosstalk to spectrally isolate three images captured by separate TDI arrays. Depending on the light sources used, narrowband filters may be needed at the light sources.
This new technology significantly improves inspection speeds and image quality, as it eliminates the need for multiple scans. The difference between traditional color imaging and multifield imaging is the filter technology. Conventional color filters have significant spectral crosstalk between RGB channels, while the multifield filters have minimum spectral crosstalk
The 32k camera uses two 16k/5 μm TDI arrays with ½ pixel offset. Two 16k/5μm image data are captured and then reconstructed to achieve a super resolution image of 32k/2.5 μm in real time. This significantly enhances detectability for subpixel defects.
Another advantage of the pixel offset technology is that existing 16k/5μm lenses can be used without sacrifice in responsivity and MTF with a smaller physical pixel size.2021 Prism Award Winner
|Camera Type||TDI Line Scan|
|Supported Interfaces||Camera Link HS|
|Spectrum Capability||Visible (400-700 nm), Near Infrared (700-1000 nm)|
|Model||Resolution||Spectrum||Interface||Pixel Size||Max Line Rate|
Linea HS 4k 300 kHz SFP+
Part number: HL-FM-04k30H-00-R
|4096 x 192||Mono||Camera Link HS, Fiber Optic||5 µm||300 kHz|
Linea HS 8k 300 kHz
Part number: HL-HM-08k30H-00-R
|8192 x 192||Mono||Camera Link HS||5 µm||300 kHz|
Linea HS 8k 400 kHz
Part number: HL-HM-08K40H-00-R
|8192 x 192||Mono||Camera Link HS||5 µm||400 kHz|
Linea HS 8k 280 kHz SFP+
Part number: HL-FM-08k30H-00-R
|8192 x 192||Mono||Camera Link HS, Fiber Optic||5 µm||280 kHz|
Linea HS 13k 300 kHz
Part number: HL-FM-13K30A-00-R
|13312 x 128||Mono||Camera Link HS||5 µm||300 kHz|
Linea HS 13k 180 kHz SFP+
Part number: HL-FM-13K18A-00-R
|13312 x 128||Mono||Camera Link HS, Fiber Optic||5 µm||180 kHz|
Linea HS 16k 300 kHz
Part number: HL-HM-16K30H-00-R
|16384 x 192||Mono||Camera Link HS||5 µm||300 kHz|
Linea HS Multifield 16k 400 kHz
Part number: HL-HF-16K13T-00-R
|16384 x 256||Color, Multifield||Camera Link HS||5 µm||400 kHz|
Linea HS 16k 143 kHz SFP+
Part number: HL-FM-16K15A-00-R
|16384 x 128||Mono||Camera Link HS, Fiber Optic||5 µm||143 kHz|
Linea HS 16k 400 kHz
Part number: HL-HM-16K40H
|16384 x 192||Mono||Camera Link HS||5 µm||400 kHz|
Linea HS Color 16k 300 kHz
Part number: HL-HC-16K10T-00-R
|16384 x 256||Color||Camera Link HS||5 µm||300 kHz|
Linea HS 16k 400 kHz BSI
Part number: HL-HM-16k40H-00-B
|16384 x 192||Mono||Camera Link HS||5 µm||400 kHz|
Linea HS 32k 400 kHz
Part number: HL-HM-32k40S-00-R
|32768 x 64||Mono||Camera Link HS||5 µm||400 kHz|
|Linea HS 16k BSI Mono Datasheet|
|Linea HS 16k Color Datasheet|
|Linea HS 16k Multifield Datasheet|
|Linea HS 32k Datasheet|
|Linea HS 4k 8k 13k 16k Datasheet|
|Linea HS Series User Manual|
|App Note: Configuring Super Resolution Mode for Linea HS 32k TDI Camera|
|Application Guideline for TDI Cameras|
|Application Note for Linea TDI Color and Multifield Alignment|
|Linea HS 8k EMC Declaration of Conformity|
|Linea ML & HS 16k 3D Model||STP|
|Linea ML & HS 16K SFP+ 3D Model||ZIP|
|Linea ML & HS 8k 3D Model||STP|
Questions? Need more information? Contact our sales team to learn more today.Contact us