Log in | Create profile | Language


Teledyne DALSA’s High Sensitivity Scanning Detectors Featured at ASNT Digital Imaging Conference

SANTA CLARA, California  – July 19, 2016 – Teledyne DALSA, a Teledyne Technologies company and global leader in digital X-Ray image sensing, will showcase its Shad-o-Scan family of scanning detectors at ASNT’s Digital Imaging Conference, taking place July 25-26 at Foxwoods Resorts and Casino in Mashantucket, Connecticut. Together with Teledyne ICM, the companies will display their unique and unmatched product lines featuring high-resolution digital x-ray detectors and portable x-ray generators.

Shad-o-Scan detectors
satisfy a wide range of imaging requirements with built-in flexibility to control the imaging mode and configure the X-ray sensor. Requiring only 15 Watts at full speed operation, the Shad-o-Scan 8K detector has no need for external cooling, reducing cost and maintenance concerns on the system level. Comprehensive self-diagnostics and 100% in-field firmware upgradeability minimizes service overhead.

With the highest dynamic range in the industry, and state-of-the-art 16-bit digitization, Shad-o-scan detectors allow for X-ray imaging at diminishingly low dose levels. Unique industrial-grade X-ray conversion stack effectively eliminates imaging artifacts associated with image lag and gain hysteresis. Several scintillators options (CsI and GdOS) are available.

The detectors offer a unique combination of higher resolution and fast imaging suitable for industrial x-ray inspectionscientific imaging, and non-destructive testing, including Printed Circuit Board (PCB) Inspection, Microfocus Computed Tomography (CT) and small-animal imaging.

For product information, visit: http://www.teledynedalsa.com/imaging/products/x-ray/scanning/shad-o-scan/

About Teledyne DALSA’s X-Ray Technology
Teledyne DALSA provides unmatched image sensing, capture and processing solutions to medical, dental, scientific and industrial equipment manufacturers. With more than 35 years of proven capability and innovation, our imaging specialists deliver leading-edge product design. Our manufacturing processes comply with the stringent quality, reliability and traceability requirements of the medical and scientific X-ray community. For more information, visit http://www.teledynedalsa.com/imaging/markets/mv/ndt/

About Teledyne DALSA
Teledyne DALSA, a Teledyne Technologies company, is an international leader in high performance digital imaging and semiconductors with approximately 1,000 employees worldwide, headquartered in Waterloo, Ontario, Canada. Established in 1980, the company designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing MEMS products and services. For more information, visit www.teledynedalsa.com.

All trademarks are registered by their respective companies.
Teledyne DALSA reserves the right to make changes at any time without notice.

Media Contact:
Geralyn Miller
Teledyne DALSA
Tel: +1 (519) 886 6001 ext. 2187
[email protected]

Sales Contact:
Teledyne DALSA X-Ray Imaging
Tel: + 1 (408) 736 6000
Email: [email protected]
Published 2016-07-19