News

Teledyne DALSA’s 86M CMOS Cameras deliver incredible resolution and frame rate

WATERLOO, Ontario December 19, 2017 - Teledyne DALSA, a Teledyne Technologies company and global leader in machine vision, announces its new high resolution camera — the Falcon4™ 86M. Available in monochrome and color, Falcon4 models combine incredibly large resolution and fast frame rates, enabling high-speed, smear-free image capture with superb spatial resolution.

The Falcon4 cameras are powered by Teledyne DALSA’s 86 megapixel global shutter CMOS image sensor, which outputs up to 16 full resolution frames per second, and higher with windowing. With more pixels than 40 HD screens, the camera allows applications to inspect more area at the same time or enables vision systems to see objects in finer detail. The global shutter capability removes any need for a mechanical shutter.

Large 6 micron pixels offer both high sensitivity and large full well capacity, and are capable of both global and rolling shutter operation. The Falcon4 is also sensitive into the NIR spectrum.

“The Falcon4 camera shines in applications where throughput and high pixel capacity matter most, such as Aerial Imaging, Reconnaissance, Security and Surveillance, 3D Metrology, and Flat Panel Display Inspection” said Mark Butler, Manager for Product Management. “The large resolution, global shutter and fast frame rate deliver imaging like no other industrial camera on the market today.”

Key features:

  • Lots of pixels – 86 million of them (10720 × 8064)
  • Up to 16 fps at full resolution, faster frame rates through windowing
  • Global shutter, for smear-free imaging,and exposure control
  • Good NIR response
  • Built-in FPN and PRNU correction
  • CLHS and GenICam compliant

About Teledyne DALSA’s Machine Vision Products and Services
Teledyne DALSA is a world leader in the design and manufacture of digital imaging components for machine vision. Our image sensors, cameras, smart cameras, frame grabbers, software, and vision solutions are used in thousands of automated inspection systems around the world and across multiple industries including automotive, electronics inspection, flat panel display, medical imaging, semiconductor, packaging and general manufacturing. For more information, visit www.teledynedalsa.com/imaging.

Teledyne DALSA is an international technology leader in sensing, imaging, and specialized semiconductor fabrication. Our image sensing solutions span the spectrum from infrared through visible to X-ray; our MEMS foundry has earned a world-leading reputation. In addition, through our subsidiaries Teledyne Optech and Teledyne Caris, we deliver advanced 3D survey and geospatial information systems. Teledyne DALSA employs approximately 1400 employees worldwide and is headquartered in Waterloo, Canada. For more information, visit www.teledynedalsa.com.

 

###
All trademarks are registered by their respective companies.
Teledyne DALSA reserves the right to make changes at any time without notice.

 


Media Contact:
Geralyn Miller, Manager, Media Relations
Teledyne DALSA
Tel: +1-519-886-6001 x2187
geralyn.miller@teledyne.com

Sales Contacts:
sales.americas@teledynedalsa.com 
sales.europe@teledynedalsa.com
sales.asia@teledynedalsa.com