http://www.teledynedalsa.com/corp/careers/careers.aspxDalsa Corporate Career RSSen-usVos principales tâches consisteront à établir les plans d’audits internes, environnementales, procédés et de systèmes, faire le suivi des mises à jours des actions correctives/préventives, FMEA et des plans de contrôle de l’usine. Vous agirez comme personne ressource pour l’application des techniques 6 sigma et Lean manufacturing (Kaizen, 5S, 7 waste, PVA etc.). Vous aurez à prendre en charge les plans d’échantillonnage et les critères d’inspection visuelle en conformité avec les standards industriels (MIL-STD) ainsi que des aspects qualité reliés à la gestion des fournisseurs (évaluations, SCAR, spécifications). Occasionnellement vous aurez à faire la gestion des produits non-conformes, aider le responsable de la gestion des plaintes clients et le responsable de la gestion des changements d’ingénierie et agir comme personnes ressource pour l’application de la méthodologie de résolution de problème 8D.http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=956QualityFull TimeBromont, PQ, CanadaThu, 28 Oct 2010 00:00:00The responsibilities if this position will cover: - Design of analog building blocks required for these products. These functions range from voltage references, OTAs to AD converters. - Composition of complete image sensor designs. - Analog Design for Testability. - Design evaluation, debugging and release for production. - Building up a wide knowledge on CMOS image sensors, their architectures and their applications. - Co-development with the other designers (analog, digital and pixel) located in Eindhoven and in other Teledyne groups e.g. in Waterloo (ONT, Canada) and Los Angeles (CA, USA). - Contact person to external design houses for outsourced design activities. The job is open for candidates with a BSc/MSc/PhD in Electronics or Device Physics. We offer excellent growth possibilities. You are a team player, creative, communicative, keen to accept challenges and enjoy following the relevant scientific developments. Good communication and documentation skills are essential both inside the group and to the customer’s world. You are fluent in English. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=988Research and DevelopmentFull Time TemporaryEindhoven, The NetherlandsMon, 7 Mar 2011 00:00:00A degree or diploma in Electronics, Engineering or a related technical discipline and at least 3 years technical electronics job experience is required. The successful candidate must have proven leadership skills and excellent communication. Travel throughout China as necessary is required in this position. If pursuing a career with a dynamic, highly technical, aggressive design and manufacturing company in the Imaging Industry with unparalleled opportunity for growth excites you, you will be interested in DALSA!http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=928SalesFull TimeShanghai, ChinaThu, 2 Sep 2010 00:00:00We have an opening for a Sales Engineer in our Shanghai office to support custom product development project sales activities, management and organization. The responsibilities of this position include providing account management in application specific product development activities, including calling customers and prospective customers; following-up on action items of on-going projects and, assisting the Business Development managers. This position has the direct responsibility of account development and management in China. The successful candidate will have a Bachelors degree in an electronics or semiconductor field, as well as some working knowledge of the industry in machine vision and/or CMOS/MEMS semiconductor process. Recent graduates and experienced professionals are encouraged to apply as position objectives will be based on the successful candidate's skills and experience. In addition, we are looking for a candidate with good time management, organizational and communication skills. This position requires Native level Chinese proficiency and high level of English proficiency. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=947SalesFull TimeShanghai, ChinaFri, 1 Oct 2010 00:00:00The successful candidate will be responsible for overseeing existing product lines of digital x-ray camera systems, the development of new camera circuits for improving analog performance as well as enhancing product functionality. Additionally, this position will work closely with CMOS design team to test new sensor designs and integrate into new products. Must be comfortable working within cross-functional teams covering Marketing (Product Development) and Operations (support of various products within Manufacturing). http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=920Research and DevelopmentFull TimeSunnyvale, CA, USAMon, 9 Aug 2010 00:00:00The successful candidate will receive training in the following areas: - Development and productivity tools - Test, measurement and troubleshooting equipment - Product architectures, implementation methods and component technologies - Troubleshooting to the sub-system or module level. - Other specialized training to support the specific work assignments The prerequisites are: - Degree or Diploma in a related technical discipline such as Electrical, Electronic, or Computer fields. Preference will be given to candidates with: - Strong knowledge of PC information technology - Fluency in oral and written English - Mechanical aptitude http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1005Research and DevelopmentFull TimeWaterloo, ON, CanadaTue, 12 Apr 2011 00:00:00Responsibilities: • Review and editing of all internal and external documents as required • Obtain necessary export permits and other documentation for shipment of products • Project files, contract files and contract communications • Development of data sheets and other materials • Tracking, record keeping, maintenance and administration of the documents • Preparation of reports, analyses and spreadsheets The successful candidate will have at least five years experience in customer service, sales and manufacturing environments in a documents or contract oriented capacity. Understanding of Canadian and American export regulations is considered a benefit. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1008SalesFull TimeWaterloo, ON, CanadaWed, 27 Apr 2011 00:00:00The standard product camera production group is pleased to announce that there is an opening for a motivated commodity buyer. The ideal candidate will be a team player who is comfortable working within a fast paced manufacturing environment. In this position, your main objective is to actively manage the commodity vendor relationship. Your responsibilities will include obtaining quotes, placing purchase orders, providing forecasts, expediting deliveries and communicating vendor performance metrics. Your qualifications should include a college diploma in materials management plus C.P.P., CPIM or PMAC courses. You must have a high degree of computer literacy plus excellent verbal and written skills. Being familiar with printed circuit assembly would definitely be an asset. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=977ManufacturingFull Time TemporaryWaterloo, ON, CanadaThu, 27 Jan 2011 00:00:00Job Responsibilities: • Establish and maintain a thorough understanding of the configuration management process and maintain an accurate product change history. • Responsible to coordinate and conduct applicable configuration management training for associates within Teledyne DALSA. • Ability to ensure that new documents are created using standard templates and are compliant to ISO requirements. The successful candidate will have: • Excellent knowledge of computer applications including ERP systems, Excel and Word. • A minimum of 3 years experience in a configuration management role, preferably in an electronics manufacturing environment. • University or College diploma in a technical or business related field. • Preference will be given to individuals with experience using PLM applications.http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1009ManufacturingFull Time TemporaryWaterloo, ON, CanadaWed, 27 Apr 2011 00:00:00Our Teledyne DALSA sales team has an exciting opening for a Customer Service Representative to join our team for a 12 month period to cover a maternity leave. Primary functions for this position include but are not limited to: • Successful order management from order intake to order closure • Coordination of consignment orders • Supporting the Repair Services group in processing RMA’s Qualifications: • Post-Secondary education in a business program or equivalent experience • Superior customer service skills • Strong business acumen • Very well organized • Excellent communication skills • Proficient with MS Office and experience working with an ERP systemhttp://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1004SalesFull Time TemporaryWaterloo, ON, CanadaMon, 11 Apr 2011 00:00:00Our new colleague will gain an in-depth technical knowledge of Teledyne DALSA’s image sensors and use this knowledge to provide the higher level of technical support that our front-line technical customer support teams are not trained to handle. They will establish working relationships with key customers, helping them design Teledyne DALSA sensors into their systems and assisting them with issues that are specific to their applications. Some customers will require minor changes to existing sensors. The individual will be expected to lead these design changes and lead these semi-custom projects to completion. You will educate and support sensor and camera manufacturing, camera development, and other Teledyne DALSA groups that require sensor technical support. Knowledge and experience in semiconductor device physics, semiconductor fabrication processes, and microelectronic circuits are required. Knowledge and experience in analog electronics, optics, and chip design are assets. You will possess at least a diploma in Electrical Engineering or Electrical Engineering Technology, Physics, or equivalent. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1010Research and DevelopmentFull Time TemporaryWaterloo, ON, CanadaWed, 27 Apr 2011 00:00:00The ideal candidate will be able to: • Work with internal and external customers to understand the Customer’s requirements and translate these into testable specifications • Propose and review architectures that balance the needs of the Customer and that of Teledyne DALSA’s capabilities • Supervise and mentor more junior designers • Work with Vendors to realize custom components to optimize camera size, cost and/or performance, etc. • Design and test for high reliability • Understand products from a systems perspective and utilize appropriate tools to optimize trade-off decisions • Help define plans which manage risk, make efficient use of resources and ultimately supply the Customer with a satisfactory deliverable • Communicate to others in a clear, concise, respectful and team-building manner Candidates having experience in analog design, digital design, FPGA coding, correction algorithms, design for manufacturability and reliability will be given preference. High-speed experience and optimization, interfacing to CCD image sensors are definite assets. Experience with direct Customer and Vendor communications is a requirement. The successful candidate will have a Bachelors degree, and preferably a Masters Degree, in Electrical Engineering with at least 7 years of design/development experience. In addition, proven experience working within a large multidisciplinary team and excellent communication skills are required. Strong candidates lacking a couple of the ideal requirements will be considered.http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=999Research and DevelopmentFull TimeWaterloo, ON, CanadaTue, 5 Apr 2011 00:00:00The responsibilities of this position include: • combining theoretical and practical knowledge to address technical issues • understanding an identified problem and developing / implementing solutions • utilizing your experience in a structured engineering environment to ensure design for manufacturability • play a key role in root cause failure analysis investigations • high speed analog and digital circuit design to optimize performance and reliability The successful candidate will have: • experience with high speed analog and digital design • hardware analysis and debugging skills using standard test instruments • the ability to work under a tight schedule and accurately document, summarize and present test results • experience with VHDL coding, preferably with FPGAs/CPLDs from Xilinx and Altera • must be a strong team player as well as have the ability to work independently • must have excellent verbal and written communication skills A minimum of an Electronics Technologist diploma (or equivalent) plus 5 years experience or an Electronics/Electrical Engineering Degree is required. Preference will be given to individuals with experience in image capture and image processing technologies as well as familiarity with CCD and/or CMOS digital cameras and framegrabber technology. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=902ManufacturingFull TimeWaterloo, ON, CanadaTue, 5 Apr 2011 00:00:00The New Product Introduction team is pleased to announce that there is an opening for a manufacturing/electronics engineer with experience related to transferring products to a manufacturing environment. We are looking for a manufacturing engineer or technologist with a strong technical background and excellent organizational, communication and leadership skills. The successful candidate for this position will take a leadership role in the introduction of new camera products, defining project tasks and assuming responsibility for their completion. The individual would work with engineering groups, production and other support departments to review and implement the necessary cost effective processes and controls to facilitate the transfer of new sensor and camera products to production. Demonstrated abilities and experience with current design practices, test equipment, fixturing and manufacturing processes are key attributes to the position. The individual will also be responsible for the assessment of the level of manufacturability of new products that are to be transferred to production and the determination of the fit of the new product to the standard manufacturing processes or determine technical scope of developing new capabilities and processes. The individual will also be responsible for the review of margin and yield issues relating the products transferred to production. The successful candidate will have a diploma or degree in Electronics/Electrical or Manufacturing/Industrial Engineering. Preference will be given to those applicants with experience in project leadership roles and new product introduction. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=991ManufacturingFull Time TemporaryWaterloo, ON, CanadaMon, 14 Mar 2011 00:00:00The primary focus for the successful candidate for this position will be to make significant contributions to the development of sensor products and technology as a technical expert on the development teams. In this position the applicant is expected to influence the design of both the device and final product architectures, and related assembly processes, to drive product excellence and technology growth. Knowledge of custom device assembly from the conventional to the emerging state of the art design concepts is considered a strong advantage for the applicant for this position. A deep technical understanding and design capability in the area of microelectronic packaging accompanied by the broad technical skills needed to influence the development of optimum product architectures is critical for success in this position. Relevant skills for this position include those listed below at a minimum: • The ability to lead, facilitate and assist in critical design decisions. • Excellent skills to create understanding and to earn trust as part of a multi-disciplinary project team. • The balance between innovation and a results-oriented approach is important in this function. A proven ability to stimulate innovation while balancing the need to meet the schedule, the project risks and the re-use of available solutions is a key capability. • The ability to persuade and influence the adherence to design guidelines. • Capable of evaluating architectures and designs against the stated requirements. • A proven record of continuous personal development through participation in conferences, vendor discussions, and research. • Able to appreciate the view of all stakeholders in a new product or process design and to integrate the best of the concepts regardless of the source into the final design. • Able to act as a facilitator with various departments to drive design and manufacturability excellence. (Helicopter view of the overall design/process.) • A demonstrated ability to solve process, and product related problems using a structured approach are a requirement of this position. • Mentoring of others to enhance their technical skills is a function of this position. • The ability to document at the concept level to clearly communicate those ideas to others is an important ability. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=992ManufacturingFull TimeWaterloo, ON, CanadaWed, 23 Mar 2011 00:00:00Knowledge of custom device assembly methodology is considered a strong advantage for the applicant for this position. Additionally knowledge and direct experience with assembly/semiconductor equipment and materials, cleanroom systems/methods and optics/coatings are all seen as key attributes. Relevant skills for this position include those listed below at a minimum: • Experience with specialized assembly of semiconductor devices and intricate mechanical and/or optical products. • Device package design experience. Knowledge of 1st and 2nd level interconnects, plating requirements, window sealing options and their relationship to reliability. • Past experience setting up User Requirement documentation for new equipment and the related product transfer. • Experience with the evaluation and measurement of device packaging materials, optical components and coatings. • Material and process implementation knowledge for adhesives and encapsulants. • Knowledge of failure analysis techniques and experience executing them. • Cleanroom experience. • Able to act as a facilitator with various departments to drive design and manufacturability excellence. • A demonstrated ability to solve process and product related problems using a structured approach is a requirement of this position. • Mentoring of others to enhance their technical skills is a function of this position. • Demonstrated ability to work as part of a multi-disciplinary project team is critical. • The ability to document at the concept level and to produce procedures that are clear and efficient for use by others. • Effective written and oral communication skills. • Skilled at reading and interpreting mechanical drawings. The successful candidate will have a diploma/degree in Materials Science, Physics, Chemistry or a related field of science, with significant field experience related to device packaging and its implementation into manufacturing. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1001ManufacturingFull Time TemporaryWaterloo, ON, CanadaWed, 6 Apr 2011 00:00:00The responsibilities of this position will include: • Learn and follow relevant work procedures and quality procedures; maintain data records as required. • Follow material control procedures to maintain accurate inventory records; identify discrepancies and report them. • Follow problem and defect reporting procedures and notify the appropriate associate responsible for action. • Follow material handling procedures to ensure the safe handling of susceptible components or assemblies. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=978ManufacturingFull Time TemporaryWaterloo, ON, CanadaWed, 9 Feb 2011 00:00:00Responsibilities for this position include but are not limited to: • Ensuring service records are detailed with appropriate information for effective product repair. • Accurate and timely creation of repair records in ERP System. • Providing RGA number and direction to customers for returning product to designate repair locations. • Obtaining Purchase Orders for non-warranty repair activity. • Managing timely repair completion through repair centres. • Closing repair work order/enter of repair work summary in ERP System. • Responding to customer inquiries on pricing, repair status and logistics. • Timely return of exchanged products sent to customer. • Prepare activity reports under the direction of the Sales management team. • Back up to for order entry ensuring accurate and timely entry of orders into ERP System. Qualifications: • Post-Secondary education in a business program • Superior customer service skills • Strong business acumen • Very well organized • Excellent communication skills • Proficient with MS Office and experience working with an ERP system http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=997SalesFull TimeWaterloo, ON, CanadaFri, 25 Mar 2011 00:00:00Your responsibility will entail ensuring all activities related to shipping, receiving , and inventory control are performed by Stores personnel in an efficient timely manner and in compliance to viable ,effective processes. You will also be instrumental in monitoring carrier performance and the timely resolution of carrier issues relating to import/export documentation or customs clearance. The ideal candidate for this position will have 5 years experience in a Stores/Logistics supervisory capacity in a high tech, fast paced manufacturing environment. In addition to demonstrated supervisory skills the ideal candidate will have in depth knowledge of Customs requirements and documentation, harmonized codes and carrier agreements. Post secondary education in business or materials management or equivalent coupled with excellent communication skills, a “make it work” attitude would provide the skills and experience to meet this challenging role. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=951Materials ManagementFull TimeWaterloo, ON, CanadaWed, 6 Oct 2010 00:00:00As a Technical Specialist you will specialize in the assembly, test and troubleshooting of complex digital cameras and sensors. You will be responsible for documenting and delivering high quality, production grade engineering cameras and sensors. In completing these projects you will also interact with other groups such as R&D, Test Engineering and Manufacturing. As a new member of our team you must be able to demonstrate: • Hands on electronics engineering experience, including a working knowledge of analogue and digital circuits. • An aptitude for analyzing, testing and troubleshooting electronic circuits. • An eye for detail, you will be able to visualize tasks while they are being defined. • You will be able to problem solve, test and troubleshoot by reading schematics. • Experience performing electronic repair, soldering to production workmanship standards. • Prepare technical reports and project related documentation including test instructions and associated procedures. • A history of successfully completing projects within a defined schedule. A minimum of an Electronics Technician diploma (or equivalent) plus a 5 years experience or an Electronics Technologist with 3 years experience is required. Preference will be given to those applicants with experience in electronic test and development. Experience with CCD technologies and FPGA design would be an asset.http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=1000ManufacturingFull Time TemporaryWaterloo, ON, CanadaTue, 5 Apr 2011 00:00:00As a Technical Specialist you will specialize in the assembly, test and troubleshooting of complex digital cameras and sensors. You will be responsible for documenting and delivering high quality, production grade engineering cameras and sensors. In completing these projects you will also interact with other groups such as R&D, Test Engineering and Manufacturing. As a new member of our team you must be able to demonstrate: • Hands on electronics engineering experience, including a working knowledge of analogue and digital circuits. • An aptitude for analyzing, testing and troubleshooting electronic circuits. • An eye for detail, you will be able to visualize tasks while they are being defined. • You will be able to problem solve, test and troubleshoot by reading schematics. • Experience performing electronic repair, soldering to production workmanship standards. • Prepare technical reports and project related documentation including test instructions and associated procedures. • A history of successfully completing projects within a defined schedule. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=998ManufacturingFull Time TemporaryWaterloo, ON, CanadaTue, 29 Mar 2011 00:00:00We have an exciting opportunity for you to join our Materials Team in the role of a Vendor Quality Specialist for PCAs and PCBs. You will actively manage supplier corrective actions and support the Vendor Quality Manager in establishing root cause. We will rely on you to initiate solutions and follow up to verify the implementation of vendor quality actions. You will monitor progress through vendor meetings and regular communication. The analysis of yield data based on internal inspection activities and vendor actions is another key component of this position. With respect to FAI activity, you will provide feedback to vendors based on FAI results and insure that actions at vendors are appropriate and relevant. The ideal candidate for this position will have 5-7 years experience in a quality role in the PCA high-tech manufacturing environment and will possess excellent knowledge of ISO 9001 standard and auditing techniques. Excellent knowledge and experience with business improvement methods, root cause analysis and statistical techniques is required. http://www.teledynedalsa.com/corp/careers/careershowposition.aspx?itemID=987Materials ManagementFull Time TemporaryWaterloo, ON, CanadaMon, 7 Mar 2011 00:00:00